ATATECH
Industry
Limited
Bluetooth
4.0
www.atateches.com
Email:[email protected]
Thank
you
for
purchasing
a
Bluetooth
Dongle
BT402
product
and
we
hope
you
enjoy
using
it.
Installation Steps:
1. Uninstall previous version of BlueSoleil. If a previous version
has been installed. Then reboot the PC.
2. Insert the Installation software CD-ROM into the CD-ROM
drive of your computer.
3. Install the program for the adaptor you are now using, If the
Installation program does not start automatically; please
double click the “Setup.exe” file on the CD manually.
4. Then follow the instructions to finish the software installation.
5. Restart the computer. After the BlueSoleil software package
is installed. This is to ensure the installed Bluetooth Device
takes effect.
6. Plug the bluetooth adaptor into a computer USB port.
7. When the computer had been restarted, start the BlueSoleil
application by clicking. (Start-Programs-IVT BlueSoleil-
BlueSoleil)
FCC Warning Statement:
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
