3.
To change the
IP Address
, using the touchpad place cursor over the appropriate control and press the center
touchpad button to activate the input window.
Note:
You will likely find it easier to configure the network settings using a PS2 keyboard that may be attached
to the front panel even while the Acuity is turned on. A network address is composed of four parts (octets)
separated by a period. To modify the next part (octet) of the network address you must use the period (.) button
to advance.
4.
To change the
Subnet Mask
, place the cursor over that menu item and press the center touchpad button to
activate the input window.
5.
To change the
Default Gateway
setting, place the cursor over that menu item and press the center touchpad
button to activate the input window.
6.
Restart the system to activate the network changes.
QuVIS Acuity
™
Page 30
QSR Version 3.3
Summary of Contents for Acuity
Page 1: ......
Page 152: ...Keyboard Hotkeys Description ENTER Complete current edit QuVIS Acuity Page 151 QSR Version 3 3...
Page 190: ...QuVIS Acuity Page 189 QSR Version 3 1...
Page 200: ......