QuVIS Acuity, User Manual

Page: 125 / 200

(TPC commands) to match the specific network automation
protocol being used by the target projector. This level of
customization allows the QuVIS servers to use a single Show
Playlist (script) with a single set of TPC automation events
regardless of the digital cinema projector it will be connected
to.
Options include:
•
None (default)
•
Christie (CP2000)
•
DPI
•
Barco (DP100)
•
NEC (iS8)
Projector Subtitle IP Address
Use this control to enter the TCP/IP network address of the
Digital Cinema projector that will be used for subtitle playback.
In order to support CineCanvas
™
subtitle playback the
projector and the Cinema Player must be properly networked
and this setting assigned.
IMPORTANT!
The IP address of the projector must be addressable by the
server for proper communication to occur. Each IP address on
the network must be unique or communication errors will occur.
Projector Control IP Address
Use this control to enter the TCP/IP network address of the
Control Panel interface for the attached Digital Cinema
projector. The control panel interface allows the server to
modify or control projector settings (i.e. douser on/off) during
playback of a Show Playlist or script.
This setting is required to establish network TCP/IP
communication between the QuVIS server and the control
panel of the projector. All of the supported digital projectors
have two independent TCP/IP addresses. One IP address
(above listed “Projector Subtitle IP address”) is for
communicating with the projector core for Subtitling features.
The second IP address (this setting) is used to communicate
with the control panel that is a vendor specific interface for
issuing automation commands and viewing projector status
information.
IMPORTANT!
The IP address of the projector must be addressable by the
server for proper communication to occur. Each IP address on
the network must be unique or communication errors will occur.
QuVIS Acuity
™
Page 124 QSR Version 3.3