QuVIS Acuity, User Manual

Page: 114 / 200

Default Soft Buttons
There are five soft function buttons located directly below the LCD
display. The function of each button is defined on the GUI directly above
the buttons location. The global default assignment of each button is set
to specific menu page that can be loaded by simply pressing the
corresponding
soft button.
The types of action that can be globally assigned to
Soft buttons (using
the Setup GUI menu page) are limited to loading a specific menu page.
Navigation to any menu page can be assigned to any (or all) of the
Soft
buttons. Custom soft button assignment will be saved, along with other
GUI settings, when a configuration (Config) file is created or updated.
Config (configuration) files allow the operators to store different setting
profiles based upon project type or individual operator. See
Setup
Config menu page for config file options.
Change Soft Button Global Assignment
1. Load the Setup GUI menu page.
2. Click (center touch pad button or left mouse click) on the Soft button
control in the DEFAULT SOFT BUTTONS section.
3. From the menu page listing, select the menu page to be assigned to
the
soft button. Complete the selection by pressing the center touch
pad button (or left mouse click).
IMPORTANT! In order to retain Soft button assignments between
sessions custom assignments must be saved in a Configuration file.
Temporary Soft Button Assignments
The ability to temporarily assign individual menu page functions
to
soft buttons that temporarily override the global assignments,
made on the Setup GUI menu page, is supported. To assign a
specific menu page function (or dashboard item – e.g. Read
Log), place the cursor over the desired function, press the round
touchpad button (so that “Assign” is displayed in the lower right
corner of the GUI) and press the
soft button you want to assign
the function to.
IMPORTANT! Temporary soft button assignments for menu
page functions are not savable and will be reset to their global
values (defined on Setup GUI menu page) when the server’s
power is cycled.
QuVIS Acuity
™
Page 113 QSR Version 3.3