Configuring for basic PLAY operation
There are many aspects of the factory setup that may not apply to your installation or application. Therefore, you
will want to “walk-through” the main menu screens not only to setup the QuVIS Acuity for your application but also
to familiarize yourself with its broad feature set.
Use the following procedures to configure the QuVIS Acuity for basic playback operations under local control.
For complete configuration procedures refer to
Chapter 4 – Front Panel GUI Interface
and
Chapter 5 – Modifying
Configuration
.
Configuration tasks:
•
Select Video Output Settings
•
Select Audio Output Settings
Select Video Output Settings
1.
Navigate to the
Play Video
menu page.
2.
Make the appropriate configuration changes in the
Video Output
section.
a.
Set the
LTC (Linear Timecode) out
type.
No LTC output – No timecode will be output.
Original Source LTC – Recorded LTC timecode, saved as part of the media file, will be output.
Absolute starting from 0 – Timecode starting at 00:00:00:00 will be output.
b.
If playback is used in an editing environment,
Metadata
information (SMPTE RP-215) may be output.
Choices include:
Original source LTC – Timecode recorded as Metadata will be output.
Same as LTC output – Use the same signal that
LTC output
is set to use.
c.
If necessary, set the
SDI Output Colorspace
.
QuVIS Acuity
™
Page 20
QSR Version 3.3
Summary of Contents for Acuity
Page 1: ......
Page 152: ...Keyboard Hotkeys Description ENTER Complete current edit QuVIS Acuity Page 151 QSR Version 3 3...
Page 190: ...QuVIS Acuity Page 189 QSR Version 3 1...
Page 200: ......
