Analog video Input/Output connections (standard)
Analog Component video (input) is included (Analog Component Output is optional) in the base configuration of the
QuVIS Acuity. Some analog video display applications require that sync signals be output on separate outputs (H &
V). Please review your display requirements to ensure you have the appropriate analog component cables (3-wire
or 5-wire).
Note:
The Acuity’s ACO (Analog Component Output) module is not capable of supporting dual-link (SMPTE 372) or
Digital Cinema 2K (2048x1080) video modes.
3-Wire A
n
alog Component Input (Sync on green) connections
For standard 3-wire analog component Input applications, make cable connections as follows:
Connect “Red” channel
cable here.
Connect “Blue” channel cable
here.
Connect “green” channel
cable here.
3-Wire Analog Component Output (Sync on green) connections
For standard 3-wire analog component Output applications, make cable connections as follows:
Connect “green”
channel cable here.
Connect “Blue” channel cable
here.
Connect “Red” channel cable
here.
5-Wire Analog Component Input (separate sync) connections
For standard 5-wire analog component record (input) applications, make input Sync cable connections as follows:
Connect “Horizontal” sync
cable here.
Connect “Vertical” sync
cable here.
QuVIS Acuity
™
Page 15
QSR Version 3.3
Summary of Contents for Acuity
Page 1: ......
Page 152: ...Keyboard Hotkeys Description ENTER Complete current edit QuVIS Acuity Page 151 QSR Version 3 3...
Page 190: ...QuVIS Acuity Page 189 QSR Version 3 1...
Page 200: ......
