Promise Technology Vess A3340 Product Manual Download Page 171

Page: 171 / 241

160

Vess A Class NVR Storage Appliance

Promise Technology

export

Usage

export -t <fileType> [-s <tftpServer>] [-p <port>] -f <fileName>

Summary

The export command exports certain types of configuration files to a remote or local host.

This command only affects subsystems.

Options

-t <file type>

Specifies the type of file to export.

userdb

User database file. This file type is not applicable for in-band and can

only be exported to a remote host.

servicereport System service report file. This file is exported to remote host for

embedded and local host for in-band.

-f <file name> Specifies the name of the file to be exported.

-s <TFTP server>

Specifies TFTP server’s IP or host name. Do not specify TFTP server for

in-band.

-p <port num> The port number of the TFTP server. Default is 69. Do not specify port number

for

in-band.

Examples

export -t userdb -s 192.168.1.1 -f userdb.bin

export -t servicereport -s 192.168.1.1 -f servicereport # for embedded

export -t servicereport -f servicereport # for in-band

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands