M
AnAgeMent
p
AtH
c
onnectIons
This section describes how to establish a management connection the Vess A3340 subsystem. There are two
methods to establish the physical connection used for management of the device. Management through the
Gigabit network connection is done using WebPAM PROe, a web browser based GUI. Alternatively you can use
an out-of-band connection using a VGA or HDMI monitor and USB keyboard to access the embedded text-based
CLI/CLU interface.
M
anageMent
p
ath
-
network
connectIon
Vess A3340 have two Gigabit Ethernet RJ-45 ports on the rear panel for connection to an Ethernet network.
Use this connection with WebPAM PROe to login as the device administrator.
To establish the management path:
1. Attach one end of an Ethernet cable to the network connector or standard NIC in the Host PC.
Attach the other end of the Ethernet cable to one of the ports on the standard network switch.
2. Attach one end of an Ethernet cable to one of the ports on the standard network switch.
Attach the other end of the Ethernet cable to the Management Port on the Vess system.
If you have multiple Vess systems, Host PCs or Servers, repeat steps 1 and 2 as required.
3. Follow the instructions for managing the basic settings of the Vess A3340.
21
Hardware Setup
Vess A3340 Product Manual
