Promise Technology Vess A3340 Product Manual Download Page 18

Page: 18 / 241

ess

a3340

rear

panel

leD

InDIcators

The LEDs on the back panel include LEDs for Ethernet data ports.

LED Description

Ethernet

Link/Act and

Speed

The LED located above each port, the LED on the right lights GREEN when the port is

connected, flashes GREEN when there is activity on the port and remains dark no connec

tion has been established. The LED on the left indicates connection speed, GREEN is 100

Mbps, ORANGE is 1000 Mbps.

Vess A3340

ports and LEDs on rear panel

VGA port

USB ports

two USB 2.0 ports

USB ports

four USB 3.0 ports

Audio In/Out

HDMI port

S/PDIF out

Gigabit Ethernet ports

Display Port

Introduction

Vess A3340 Product Manual

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands