Promise Technology Vess A3340 Product Manual Download Page 185

Page: 185 / 241

174

Vess A Class NVR Storage Appliance

Promise Technology

rlacache= Enables or disables read look ahead cache on the physical drive(s).

enable

disable

cmdqueuing=

Enables or disables command queuing on the physical drive(s).

enable

disable

temppollint=

(15-255 ) Drive temperature polling interval in seconds. If value is 0, polling is

disabled. For high availability products only.

mediumerrorthreshold= (0-4294967294 ) Medium error threshold. If the threshold is reached,

the physical drive is marked as dead. The default value is 0, indicating that physical drive is not

marked as dead for medium errors. For high availability products only.

-v

Verbose mode. Used with -a list.

Examples

phydrv

phydrv -v

phydrv -a locate -p 9

phydrv -a mod -s “writecache=enable,rlacache=enable”

phydrv -a offline -p 8

phydrv -a online -p 8

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands