Promise Technology Vess A3340 Product Manual Download Page 170

Page: 170 / 241

159

Managing with CLI

Vess A3340 Product Manual

Examples

event

event -v

event -l nvram

event -a clear -lnvram

event -c 200

event -a list -i852 -c200

Options

-a <action>

Specifies the action to perform.

list

(Default) Displays information and status of the enclosure.

mod Modifies settings. Requires the -s option.

locate Locates an enclosure by flashing its LEDs.

-e <encl id>

Enclosure ID. The default value is 1 if unspecified.

For list action, the default is for all enclosures if unspecified.

-s “<option>=<value>” Specifies the settings to change. Applies to the JBOD enclosures only.

tempwarning= (25-45) Enclosure warning theshold temperature, in degrees Celsius.

tempcritical=

(30-51) Enclosure critical theshold temperature, in degrees Celsius.

ctrltempwarning= (90-95) Controller warning theshold temperature, in degrees Celsius.

ctrltempcritical= (100-105) Controller critical threshold temperature, in degrees Celsius.

-t <FRU type> Specifies which type of FRU to locate. Requires -a locate option.

ctrl

Locates the controller.

cooling Locates the cooling unit.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands