Promise Technology Vess A3340 Product Manual Download Page 212

Page: 212 / 241

201

Troubleshooting

Vess A3340 Product Manual

AVe

erVIce

eport

Service Report is a detailed report covering the configuration and status of all

components in your RAID system. A support technician or field engineer might request a

service report for the purpose of diagnosis and troubleshooting.

To save a system configuration file:

1. Click on the Subsystem icon (IP address and device name) in Tree View to open

the Subsystem Information display.

2. Click the

Save

button in the Save System Service Report row of the information

display.

Information for the report is gathered and compiled. This action takes up to a few

minutes, depending on the size of your RAID system.

Determine where you want to store the file on the Host PC, then click the

Save

button in the pop-up menu.

The report saves to your Host PC as a compressed HTML file.

Double-click the downloaded file to decompress it.

5. Double-click the report to open it in your default browser.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands