Promise Technology Vess A3340 Product Manual Download Page 165

Page: 165 / 241

154

Vess A Class NVR Storage Appliance

Promise Technology

Summary

The ctrl command displays controller information and changes controller settings.

Options

-a <action>

Specifies the action to perform.

list

(Default) Lists controller information.

mod Changes controller settings.

clear Clears controller conditions.

-i <ctrl ID>

Specifies the controller ID.

-c <ctrl count> Controller count. Required for information on multiple controllers.

-s “<option>=<value>” Specifies which settings to change.

alias= A user-specified name for the controller.

Up to 48 characters long, alpha- numeric characters, blank spaces and underscores

The beginning and ending blank spaces are discarded.

coercion= Enables or disables disk coercion. Disk coercion will truncate the size of the physical

drives. Makes different size drives appear to be the same size. For example, a 90.1 GB drive

would appear as the same size as an 89.8 GB drive. Important when using drives of different

manufacturers for rebuilds or as hot spares.

enable

disable

coercionmethod= The method of coercion.

GBTruncate Truncates the drive to the nearest 1-billion byte boundary.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands