Promise Technology Vess A3340 Product Manual Download Page 107

Page: 107 / 241

Vess A Class NVR Storage Appliance

Promise Technology

sIng

the

eaDer

The Header contains the following items:

Language

– Choose a display language

View

– To view the Event Frame,

Logout

– To logout

sIng

ree

Iew

Tree View enables you to navigate around all components of the Vess enclosure, software management, RAID

controller, enclosure, physical drives, disk arrays, logical drives, and spare drives. The figure below shows the

components of Tree View.

WebPAM PROe Tree View

The Administrative Tools section is different for the Administrator and Super Users than for other users. The

remainder of the Tree is the same for all users.

Logged-in User

Vess Class A3340 enclosure

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands