Promise Technology Vess A3340 Product Manual Download Page 148

Page: 148 / 241

137

Managing with CLI

Vess A3340 Product Manual

AnAgIng

wItH

tHe

clI

•

Opening the CLI on Windows (below)

•

Table of Supported Commands

•

Notes and Conventions

•

List of Supported Commands

The Command Line Interface (CLI) provides rapid setup of disk arrays and logical drives.

You can also manage your system using the CLI. However, ongoing management is much

easier with the CLU or WebPAM PROe.

PenIng

tHe

clI

IndowS

To open the CLI, click the CLI icon on the desktop or:

1. Go to

Start > Run

and click the

Browse

button.

2. Navigate to the

C:\PromiseApp\clitest

older

3. Click

clitest.exe

file then click the Open button.

4. Click the

button in the

Run

dialog box.

The CLI window opens.

Use the default user name,

administrator

, and default password,

password

, to login.

Important

DO NOT move any files from or copy any files to the PromiseApp folder

on the C Drive [C:\PromiseApp] in the Windows OS.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands