Promise Technology Vess A3340 Product Manual Download Page 190

Page: 190 / 241

179

Managing with CLI

Vess A3340 Product Manual

-i <Spare Id>

Specifies the ID of the spare drive.

-p <PD ID>

Specifies the ID of the physical drive. Requires the -a add option to configure

a drive as a spare.

-d <DA ID or DA ID List>

Specifies the disk array ID. Requires the -a list option. Displays

a list of global spares and spares dedicated to this disk array.

When used with other actions, it specifies the disk array IDs to

which this spare is dedicated.

-t <type>

Specifies the type of hot spare drive.

A global hot spare drive.

A dedicated hot spare drive.

-r <revertible> Specifies whether the spare drive is revertible.

y Yes.

n No.

-s “<option>=<value>” Specifies options for the spare drive.

mediapatrol=

Enables or disables Media Patrol.

enable

disable

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands