Promise Technology Vess A3340 Product Manual Download Page 182

Page: 182 / 241

171

Managing with CLI

Vess A3340 Product Manual

During PDM, the data on the suspect drive is transferred to the replacement drive while the

logical drive remains online.

After PDM, the replacement drive becomes part of the disk array. The suspect drive become

unconfigured and any PFA condition remains on it.

This command starts, stops, pauses, and resumes a PDM and monitors the progress of a

running PDM.

A PFA drive cannot be used until you clear the PFA condition. To clear the PFA conditon of a

physical drive, please refer to

phydrv

command. Note that the destination drive must be the

same media type, HDD or SSD, as the other physical drives in the disk array.

Options

-a <action>

Specifies the action to perform.

list

(Default) Displays the active and paused PDMs and their status.

start

Starts a manual PDM.

stop

Stops a PDM.

pause

Pauses a PDM.

resume

Resumes a paused PDM.

-d <DA ID>

Specifies which disk array on which to perform the PDM.

-s <sequence Num>

Specifies the sequence number of the suspect drive.

-p <PD ID>

Specifies physical drive ID of the replacement drive.

Examples

pdm

pdm -a start -d0 -s2 -p10

pdm -a stop -d0 -s2

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands