Promise Technology Vess A3340 Product Manual Download Page 150

Page: 150 / 241

139

Managing with CLI

Vess A3340 Product Manual

able

upporteD

oMManDs

ontInueD

)

Command Action

View media patrol status and progress. Start, stop, pause, or resume media patrol.

net

View or edit ethernet network information and settings.

password

Modify a user’s password.

pdm

View PDM status and progress. Start, stop, pause, or resume PDM process.

phydrv

View or edit physical drive information and settings. Locate a physical drive via LEDs.

View redundancy check status and progress. Start, stop, pause or resume redun-

dancy check.

View rebuild status and progress. Start, stop, pause, or resume a rebuild process.

View spare check status. Start spare check.

spare

Create or modify hot spare drives.

spath

Discover and change subsystem path.

stats

View or reset statistics.

subsys

View or edit subsystem information and settings.

swmgt

View, start or stop software component.

sync

View logical drive synchronization status and progress.

transit

View transition status and progress. Start, stop, pause, or resume a transition pro-

cess.

user

List, modify, create and delete user accounts on subsystem.

help

When used alone will display this menu. When used in conjunction with a command

(example: help array) it will display help information for that particular command.

This can be used in place of the help command or optionally can be used as a switch

for a command (example: array -?) to provide command usage.

Note

: Commands are NOT case sensitive.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands