Promise Technology Vess A3340 Product Manual Download Page 52

Page: 52 / 241

Viewing Enclosure Information (CLU)

To view enclosure information:

Main Menu

Subsystem Management

Enclosure Management

2. Highlight the enclosure you want and press

Enter

You can monitor power supplies, cooling units, enclosure temperatures and voltages.

Adjustable items

You can set or adjust the following items:

•

Enclosure Warning and Critical temperature thresholds

See “Making Enclosure Settings” below.

Making Enclosure Settings (CLU)

To make Enclosure settings:

Main Menu

Subsystem Management

Enclosure Management

2. Highlight the enclosure you want and press

Enter

3. Highlight

Enclosure Settings

and press

Enter

4. Highlight the

Temperature Warning

threshold you want to change.

5. Press the backspace key to erase the current value.

6. Type a new interval value in degrees C.

7. Press

Control-A

to save your settings.

Managing with CLU

Vess A3340 Product Manual

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands