Promise Technology Vess A3340 Product Manual Download Page 79

Page: 79 / 241

Deleting a Logical Drive (CLU)

To delete a logical drive from a disk array:

Main Menu

Disk Array Management

2. Highlight the disk array that contains the logical drive you want to delete and press

Enter

3. Highlight

Logical Drives in the Disk Array

and press

Enter

4. Highlight the logical drive you want to delete and press the spacebar to mark it.

The mark is an asterisk (*) to the left of the listing.

5. Highlight

Delete Marked Logical Drives

and press

Enter

Press Y to confirm the deletion.

Press Y again to re-confirm.

Caution

When you delete a logical drive, you delete all the data it contains.

Back up all important data before deleting a logical drive.

Vess A Class NVR Storage Appliance

Promise Technology

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands