Promise Technology Vess A3340 Product Manual Download Page 66

Page: 66 / 241

Step 3 – Logical Drive Creation

1. If you want to specify an alias to the logical drive, highlight

Alias

and type a name.

Maximum of 32 characters (letters, numbers, spaces and underscores).

2. Highlight

RAID Level

and press the spacebar to toggle though a list of available RAID levels.

3. If you want to create multiple logical drives, highlight

Capacity

, press the backspace key to

remove the current value, then type a new smaller value.

4. RAID 30, 50 and 60 only. Highlight

Number of Axles

and press the spacebar to choose the

number of axles.

5. For the following items, accept the default value or highlight and press the spacebar to choose

a new value:

•

Highlight

Stripe

and press the spacebar to toggle through stripe

sizes and choose 64 KB, 128 KB, 256 KB, 512 KB, or 1 MB.

•

Highlight

Sector

and press the spacebar to toggle through

sector sizes and choose 512 B, 1 KB, 2 KB, or 4 KB.

•

Highlight

Write Policy

and press the spacebar to toggle write cache

policy between

WriteBack

and

WriteThru

(write through).

•

Highlight

ead Policy

and press the spacebar to toggle read cache

policy though [

ReadCache

ReadAhead

, and

NoCache

6. Highlight

Save Logical Drive

and press

Enter

Step 4 – Summary

Review logical drives you are about to create for your new array. Then do one of the following

actions:

• If you agree with the logical drives as specified, highlight

Complete Disk Array Creation

and

press

Enter

• If you specified less than the full capacity for the logical drive in the previous screen, and you

want to add another logical drive now, highlight

Create New Logical Drive

and press

Enter

•

If you do not agree with the logical drives, highlight

Return to Previous Screen

and press

Enter

to begin the process again.

Managing with CLU

Vess A3340 Product Manual

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands