Promise Technology Vess A3340 Product Manual Download Page 114

Page: 114 / 241

103

Managing with WebPAM PROe

Vess A3340 Product Manual

ebuIlD

ettIngs

To change Rebuild setting the in Background Activities Settings menu:

1. Use the

Rebuild Rate

drop-down menu to choose a rate:

•

Low

– Fewer system resources to the Rebuild, more to data read/write operations.

•

Medium

– Balances system resources between the

Rebuild and data read/write operations.

•

High

– More system resources to the Rebuild, fewer to data read/write operations.

2. To enable Auto Rebuild (rebuilds when you swap out the failed drive with a new one) Check the

Enable

Auto Rebuild

box.

3. Click the

Submit

button.

Rebuild Rate

When you rebuild a disk array, you are actually rebuilding the data on one physical drive.

•

When a physical drive in a disk array fails and a spare drive of adequate capacity is available, the disk array

begins to rebuild automatically using the spare drive.

•

If there is no spare drive of adequate capacity, but the Auto Rebuild function is ENABLED, the disk array

begins to rebuild automatically as soon as you remove the failed physical drive and install an unconfigured

physical drive in the same slot.

•

If there is no spare drive of adequate capacity and the Auto Rebuild function is DISABLED, you must

replace the failed drive with an unconfigured physical drive, then perform a

Manual Rebuild

ackgrounD

ynchronIzatIon

Synchronization is automatically applied to redundant logical drives when they are created. Synchronization

recalculates the redundancy data to ensure that the working data on the physical drives is properly in sync.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands