Promise Technology Vess A3340 Product Manual Download Page 183

Page: 183 / 241

172

Vess A Class NVR Storage Appliance

Promise Technology

phydrv

Usage

phydrv [-a <action>] [-p <PdId>] [-c <Pd count>] [-v]

phydrv -a mod -p <PdId> -s “<list of settings>”

phydrv -a locate -p <PdId>

phydrv -a online -p <PdId>

phydrv -a offline -p <PdId>

phydrv -a clear -t <condition type> -p <PdId>

Summary

The phydrv command displays physical drive information, changes physical drive settings,

locates individual drives, and forces a drive to an online or offline state.

Options

-a <action>

Specifies the action to perform.

list

(Default) Displays all physical drives, their make, model number, and array

they belong to. Their status is also shown.

mod Modifiies physical drive settings.

locate Flashes the physical drive’s LED so you can location it.

online Forces a drive from an Offline to an Online state.

offline Forces a drive from an Online to an Offline state.

Caution

Do this action only in extreme conditions. It causes data corruption in

most cases.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands