Promise Technology Vess A3340 Product Manual Download Page 12

Page: 12 / 241

ntroductIon

The Vess A-Class NVR storage appliance is specially engineered for medium to large scale IP video surveillance

deployment. The Vess A-Series is ideally suited for continuous surveillance in banks, malls, casinos, factories,

warehouses, and similarly sized commercial, residential, governmental or private enterprises. The subsystems

are capable of continuous recording and playback operation without dropping frames for networked installations

of up to 80 High-Definition IP cameras.

Vess A-Class NVR storage appliances are available with Windows operating systems, a Video Management

Software suite, and disk drives in order to streamline the installation and integration process. The Vess A-Series

subsystems are stand-alone devices with internal RAID storage, eliminating need for additional servers, controllers,

separate enclosures etc. The Vess A-Series uses the renowned PROMISE RAID engine for maximum reliability,

all drive bays are hot-swappable, and models are available with redundant power supplies to ensure data safety

and uninterrupted operation.

ess

A-s

erIes

VerVIew

yStem

anagement

The Vess A-Series are shipped with either Windows Embedded Standard 7 Runtime (WS7P).

anageMent

nterfaces

•

Browser-based management with WebPAM PROe

•

Command Line Interface (CLI)

•

Command Line Utility (CLU)

Introduction

Vess A3340 Product Manual

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands