Promise Technology Vess A3340 Product Manual Download Page 186

Page: 186 / 241

175

Managing with CLI

Vess A3340 Product Manual

Usage

rc [-a <action>] [-l <LdId>]

rc -a start -l <LdId> [-n] [-p]

rc -a stop -l <LdId>

rc -a pause -l <LdId>

rc -a resume -l <LdId>

Summary

The rc command starts, stops, pauses and resumes a Redundancy Check and monitors the

progress of a running Redundancy Check.

Options

-a <action>

Specifies action to perform.

list

(Default) Displays active and paused Redundancy Checks and their status.

start

Starts a Redundancy Check.

stop

Stops a Redundancy Check.

pause

Pauses a Redundancy Check.

resume

Resumes a paused Redundancy Check.

-l <Ld ID>

Specifies the logical drive ID on which to run the Redundancy Check.

-n Do not fix inconsistent data. This option causes Redundancy Check to run without correcting

inconsistent data. All inconsistency errors are reported.

-p Pause on error. This option causes Redundancy Check to pause when it encounters

inconsistent data. The default is to continue on error.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands