Promise Technology Vess A3340 Product Manual Download Page 80

Page: 80 / 241

Caution

When you delete a logical drive, you delete all the data it contains.

Back up all important data before deleting a logical drive.

Viewing Logical Drive Information (CLU)

To view logical drive information:

Main Menu

Logical Drive Management

2. Highlight the logical drive you want and press

Enter

The information and settings screen appears.

3. Highlight any of the following and press

Enter

to view more information:

•

Check Table

– Read Check, Write Check, and Inconsistency Check Tables

•

Logical Drive Statistics

•

Background Activities

•

Locate Logical Drive

Viewing Logical Drive Statistics (CLU)

To view logical drive information:

Main Menu

Logical Drive Management

2. Highlight the logical drive you want and press

Enter

The information and settings screen appears.

3. Highlight

Logical Drive Statistics

and press

Enter

The statistics screen appears.

To clear logical drive statistics, see “Clearing Statistics (CLU)” on page 87.

Managing with CLU

Vess A3340 Product Manual

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands