Promise Technology Vess A3340 Product Manual Download Page 184

Page: 184 / 241

173

Managing with CLI

Vess A3340 Product Manual

clear Clears a drive’s condition.

-p <PD ID>

Specifies the physical drive ID.

-c <count>

Specifies number of drives when their ID numbers are sequential.

-t <condition type>

Specifies type of condition to clear. Requires the -a clear option.

pfa

Clears a PFA condition on the drive.

staleconfig

Clears a stale configuration on the drive.

-d <drive type>

Specifies type of settings to modify. Requires the -a mod option.

Defaults to be all if -d is not specified.

sata

SATA related setting(s): writecache, rlacache, and

cmdqueuing.

The SATA settings apply to all SATA physical drives.

all

All drives where is applicable.

-s “<option>=<value>” Specifies which settings to change.

alias= User-specified name, only for configured physical drives. Up to 32 characters,

containing alpha- numeric characters, blank spaces and underscores. Beginning and

ending blank spaces are discarded.

The following global settings are for physical drives that support these features:

writecache=

Enables or disables write cache on the physical drive(s).

enable

disable

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands