Promise Technology Vess A3340 Product Manual Download Page 133

Page: 133 / 241

122

Vess A Class NVR Storage Appliance

Promise Technology

erFormance

onItorIng

The Performance Monitor displays real-time performance statistics for logical drives and physical drives. The

vertical scale adjusts dynamically to accommodate the statistical data.

Because it reports performance in real-time, to see data in the monitor, there must be I/O data activity taking

place between the subsystem and the Host.

To monitor performance:

1. Click the

Administrative Tools

icon.

2. Click the Performance Monitoring icon.

Click the Information tab for aggregated statistics; or choose the Read/Write tab to view specific Read

and Write performances separately.

4. Under Logical Drive, choose the metric you want to see from the Measurement drop-down menu.

5. Check the boxes for the logical drives you want to see.

•

Total of all logical drives

•

Up to 4 devices

Information

•

Bandwidth in MB/s

•

Cache usage by %

•

Dirty cache usage by %

•

Maximum latency in ms

•

Average latency in ms

•

Minimum latency in ms

•

I/Os per second

Read/Write

•

Read bandwidth

•

Write bandwidth

•

Maximum Read latency in ms

•

Maximum Write latency in ms

•

Average Read latency in ms

•

Average Write latency in ms

•

Minimum Read latency in ms

•

Minimum Write latency in ms

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands