Promise Technology Vess A3340 Product Manual Download Page 31

Page: 31 / 241

Push here when returning

or replacing the carrier

into an empty drive bay.

Pull here to release the carrier handle latch.

Then pull the carrier straight out by the han-

dle. Place your free hand under the carrier.

Do not drop the disk carrier, even if it is empty.

Tabs for locking mechanism insert. This piece must be removed

to unlatch the carrier. To remove, squeeze the tabs together and

pull out. To reinsert, squeeze the tabs together and replace in

position. Do not discard the locking mechanisms.

Vess A3340 Disk carrier with HDD installed - front view

Caution

The Vess A-Series supports disk drive hot-swapping. To avoid hand contact

with an electrical hazard, do not remove more than one drive carrier a time.

Vess A Class NVR Storage Appliance

Promise Technology

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands