Promise Technology Vess A3340 Product Manual Download Page 75

Page: 75 / 241

Making Spare Drive Settings (CLU)

To change spare drive settings:

Main Menu

Spare Drive Management

A list of the current spare drives appears, including the following parameters:

2. Highlight the spare drive you want to change and press

Enter

3. Highlight the setting you want to change:

•

Revertible

– A revertible drive can be returned to spare status

after you replace the failed drive in a disk array.

•

Type

– Dedicated means this spare drive can only be used with the specified

disk arrays. Global means this spare drive can be used by any disk array.

4. Press the spacebar to toggle between the choices.

5. For dedicated spares, type the array number the spare is assigned to.

6. Press

Control-A

to save your settings.

Running Spare Check (CLU)

To run Spare Check:

Main Menu

Spare Drive Management

A list of the current spare drives appears.

2. Highlight the spare drive you want to check and press

Enter

3. Highlight

Start Spare Check

and press

Enter

The results appear next to Spare Check Status in the same window. Healthy means normal.

Vess A Class NVR Storage Appliance

Promise Technology

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands