Promise Technology Vess A3340 Product Manual Download Page 69

Page: 69 / 241

Viewing Disk Array Information (CLU)

Main Menu

Disk Array Management

2. Highlight the disk array you want and press

Enter

The information and settings screen appears.

3. Highlight any of the following and press

Enter

to view a list of:

•

Physical drives in this array

•

Logical drives in this array

•

Spare drives of the disk array

Enabling Media Patrol, PDM, and Power Management on a

Disk Array (CLU)

Media Patrol checks the magnetic media on physical drives. Predictive Data Migration (PDM)

migrates data from the suspect physical drive to a spare drive

before

the physical drive fails. Power

Management parks the heads, spins down, and stops rotation after a set period of time to reduce

power consumption.

Media Patrol, PDM, and Power Management are enabled by default. Enabled is the recommended

setting for both features.

To enable Media Patrol, PDM, and Power Management on a disk array:

Main Menu

Disk Array Management

2. Highlight the disk array you want and press

Enter

3. Highlight

Media Patrol

and press the spacebar to toggle between

Enable

and

Disable

4. Highlight

PDM

and press the spacebar to toggle between

Enable

and

Disable

5. Highlight

Power Management

and press the spacebar to toggle between

Enable

and

Disable

6. Press

Control-A

to save your settings.

Vess A Class NVR Storage Appliance

Promise Technology

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands