Promise Technology Vess A3340 Product Manual Download Page 19

Page: 19 / 241

ess

a3340

rear

panel

connectIons

Access to physical data and management connections are located on the back panel of the Vess A3340.

Feature Description

HDMI

Provides video out connection for HDMI enabled monitors used to view the management

interface using CLI, CLU or WebPAM PROe.

VGA

This is also used for a video out connection for VGA monitors, it is also used to view the

management interface using CLI, CLU or WebPAM PROe.

USB

The back panel of the A3340 features two USB 2.0 and two USB 3.0 ports. Use to connect

to a USB keyboard for managing the Vess A-Series, or use it to transfer data to or from a

USB memory device.

RS-232

Serial port can be used for two different functions:

1. Use for the controlling line connection to an uninterruptible power supply (UPS).
2. Use to connect to analog cameras using the analog camera input cable.

Audio In

Use for input from a peripheral audio device, such as a microphone. Plug-In Power micro-

phones are supported.

Audio Out

Use for output (line out) peripheral audio device (speakers, for example).

Vess A Class NVR Storage Appliance

Promise Technology

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands