Promise Technology Vess A3340 Product Manual Download Page 197

Page: 197 / 241

186

Vess A Class NVR Storage Appliance

Promise Technology

sync

Usage

sync [-a <action>] [-l <LdId>]

Summary

The sync command monitors the progress of background synchronization. Background

synchronization makes logical drive consistent. It starts automatically when a redundant logical

drive is created. But unlike initialization, background synchronization allows read and write

operations on the logical drive.

If an initialization starts, the background synchronization pauses until the initialization has

finished.

Since background synchronization is starts, pauses, and resumes automatically, there is no need

for start, stop, pause, or resume functions.

Options

-a <action>

Specifies the action to perform.

list

(Default) Displays the current background synchronization activities and their

status.

-l

Specifies the logical drive ID on which background synchronization is running.

Examples

sync

sync -l3

sync -a list -l3

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands