Promise Technology Vess A3340 Product Manual Download Page 23

Page: 23 / 241

Secure ear bracket to device housing - right side

left side ear bracket

and handle

right side ear

bracket and handle

Ear brackets shipped with device

ttacH

ear

BracketS

Front

The Vess A3340 ships with tow ear brackets, one for the left side, another for the right. These attach at

the front sides of the device housing. Once the brackets are securely attached and the unit has been properly

installed in the sliding rail system, these handles can be used to pull or push the device out or into the rack

system, while the sliding rails support the weight of the device. DO NOT lift or attempt to support the weight of

the Vess A3340 using the handles on the ear brackets.

Attach each ear bracket at the front, on each side of the device housing, and secure with the screws included with the ship-

ment. The handle should protrude in the direction of the front of the device.

The example illustration below shows the right side.

Cautions

Do not lift or move the Vess A3340 unit by the handles on the ear

brackets in front.

Vess A Class NVR Storage Appliance

Promise Technology

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands