Promise Technology Vess A3340 Product Manual Download Page 179

Page: 179 / 241

168

Vess A Class NVR Storage Appliance

Promise Technology

menu

Usage

Summary

Use this to switch the user interface to CLU mode.

Usage

mp -a <action>

Summary

The mp command activates Media Patrol. Media Patrol searches the physical drives for media

errors. When an error is found, Media Patrol attempts to repair the error. If it fails to correct

the error, Media Patrol attempts to remap the sector. Note: Sector remapping is not currently

supported.

You can start, stop, pause, or resume Media Patrol and monitor its progress and status.

Options

-a <action>

Specifies the action to perform.

list

(Default) Displays the status and progress of Media Patrol.

start Starts Media Patrol.

stop Stops Media Patrol.

pause Pauses Media Patrol.

resume Resumes a paused Media Patrol.

Examples

mp -a stop

mp -a resume

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands