Promise Technology Vess A3340 Product Manual Download Page 177

Page: 177 / 241

166

Vess A Class NVR Storage Appliance

Promise Technology

logdrv

Usage

logdrv [-a <action>] [-l <LdId>] [-c <Ld count>] [-v]

logdrv -a locate -l <LdID>

logdrv -a mod -l <LdId> -s “<list of ld settings>”

Summary

The logdrv command displays information about the logical drives and changes logical drive

settings.

Options

-a <action>

Specifies the action to perform.

list

(Default) Displays a summary of one or more logical drives.

mod Changes logical drive settings.

locate Locates a logical drive within the enclosure by flashing drive carrier LEDs.

-l [<LD ID>]

Logical drive ID.

-c [<LD count>] Logical drive count. Requires the -a list option.

-s [“<option>=<value>”]

Specifies the logical drive settings to change.

alias= A user-specified name for the logical drive. Up to 32 characters, containing

alpha-numeric characters, blank spaces and underscores. Beginning and

ending blank spaces are discarded.

WritePolicy=

Specifies logical drive write policy.

writethru

Writes are not cached.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands