Promise Technology Vess A3340 Product Manual Download Page 195

Page: 195 / 241

184

Vess A Class NVR Storage Appliance

Promise Technology

subsys

Usage

subsys [-a <action>] [-v]

subsys -a mod -s “<list of settings>”

subsys -a lock [-r] [-t <number of minutes>]

subsys -a unlock [-f]

subsys -a chklock

Summary

The subsys command displays and changes subsystem settings and locks the subsystem so that

only you can make modifications.

Options

-a <action>

Specifies the action to perform.

list

(Default) Displays information for the specified subsystem.

mod Modifies subsystem settings.

lock

Locks the subsystem so other users cannot apply changes.

Other users must wait for you to unlock the system or for your lock to expire.

unlock

Clears a subsystem lock.

chklock

Checks the status of the lock.

-s “<option>=<value>” Specifies which subsystem settings to change.

alias= User-specified name for the subsystem. Up to 48 characters, alpha-numeric

characters, blank spaces and underscores. Beginning and ending blank spaces are

discarded.

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands