Promise Technology Vess A3340 Product Manual Download Page 14

Page: 14 / 241

ArdwAre

The following section provides a summary of the front and back panel hardware features of the Vess A-Series

enclosures.

ront

anel

ardware

The front panel of Vess A-Series enclosures provide access to drives carriers. Some A-Series units are shipped

with secure covers to protect the drive carriers from being unintentionally removed.

For all Vess A-Series enclosures, defective drives can be replaced without interruption of data availability to

the host computer. If so configured, a hot spare drive will automatically replace a failed drive, securing the fault-

tolerant integrity of the logical drive. The self-contained hardware-based RAID logical drive provides maximum

performance in a compact external enclosure.

Introduction

Vess A3340 Product Manual

Summary of Contents for Vess A3340

















































































































































































































































Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands

Promise Technology Vess A3340, Product Manual

Search results

Summary of Contents for Vess A3340

Reviews:

Related manuals for Vess A3340

Brands by name

Popular brands