Overview
This product is a 5G wireless bridge and the maximum
transmission distance is 2KM at optimal environment conditions.
Compare to wired equipment, it gives you cost-saving effect and
supports power supply through PoE which enables simpler and
faster installation.
Features
Up to 2km Wireless Data Transmission
1T1R SISO Support
5Ghz Frequency Band
Industrial Antenna Mounted
Suitable for Long-Distance Transmission
IP65
Plug and Play, Various Configurations Support
Hardware connection schematic diagram
LAN PoE
24V PoE Power Adapter
Bridge
Switch, Computer, IP Camera & Etc.
Quick Start Guide
IXWB-450
Indoor/Outdoor Wireless Digital Bridge/CPE
Please read carefully the instruction manual before use. Depending
on the model, the image and the actual look of the product may vary.
Package
LAN cable
Metal tie band
IXWB-450
Quick Start Guide
Rev.2.0
Hardware Overview
DIP 스위치
DC
LAN1/PoE
LAN2
디지털 스위치/리셋
DIP Switch
Digital Switch/ Reset
DIP Switch
To adjust the transformation between MASTER and SLAVE mode
of the wireless bridge.
DC
Power interface,12V 1A DC power interface.
Digital
Switch/
Reset
Both digital switch and reset button, short press the button
when electrifying, the numeric value of the digital tube will be
added one and press 15 seconds, the device will be restored to
the factory setting.
LAN1/PoE
This is a data transmission port, and it is also a power port. When
the device works in the bridge mode, the interface acts as a LAN
port function. When the device works in the route mode, the
interface acts as a WAN port function. This interface is used to
connect the PoE interface to the PoE power.
LAN2
This is a LAN data transmission port which can connect
computers, cameras, switches and other devices.
