Peri LPS Screen, Instructions For Assembly And Use, Page: 98 / 172

96
10a
10b
10.3
10.3
10.2
h
B
C3 Suspension on the Structure
Assembly of the Climbing Unit
Warning
ƒ Risk of falling from unsecured building
edges. A fall can result in serious inju-
ry or even death.
⇒ ⇒
Install guardrails.
⇒ ⇒
Use personal protective equipment
to prevent falling from a height
(PPE).
ƒ
During assembly on the construction
site, components may fall to the
ground and hit people below. This
could lead to serious injuries or even
death.
⇒ ⇒
Cordon off areas of risk under the
working areas.
⇒ ⇒
Release the climbing unit from the
crane lifting gear only when all
climbing shoes are closed and the
climbing unit fully rests on the bot-
tom Slab Shoes.
Preparations
1. Mount required guardrails on all lead-
ing slab edges or ensure that PPE is
used.
2. Attach top (10a) and bottom Slab
Shoes (10b) to the slab.
3. Adjust the height of the bottom Slab
Shoe in order to ensure accurate align-
ment of the screens.
4. Open the folding runners (10.3) of the
Slab Shoes (10a) and (10b), see Sec-
tion "Opening and Closing the Rail
Guidance Shoe" on Page 112.
5. Lock the climbing pawl (10.2) of the
top Slab Shoe (10b), in order to pre-
vent inadvertent locking into place, in
the event h
B
= n x 50 cm. See Section
"Activating and Deactivating the
Climbing Pawl" on Page 113.
(Fig. C3.03)
Components
10
Slab Shoe-2 LPS 10 t
10.2
Climbing Pawl
10.3
Folding Runners
Fig. C3.03
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration