Peri LPS Screen Instructions For Assembly And Use Download Page 162

Page: 162 / 172

LPS Light Climbing System

160

Item no. Weight kg

124777

0.210

Anchor Bolt PERI 14/20 x 130

For temporary fixing to reinforced concrete struc-
tures.

Note

See PERI Data Sheet!
Drilling Ø 14 mm.

130

SW 24

Ø14

029270

0.331

Advancing Bolt M24, galv.

For fixing the M24 anchor system if the plywood
formlining is drilled through.

M 24

SW 19

029280

0.196

Accessories

Anchor Positioning Plate M24, galv.

026430

0.334

Bolt ISO 4014 M24 x 70-10.9, glav.

High-strength bolt for anchoring climbing
systems.

M24

SW 36

030860

0.792

Threaded Anchor Plate DW 20

For use with Tie Rod DW 20, B 20 or Screw-On
Cone-2 M24/DW 20. For anchoring in concrete.

Note

Lost anchor part.

DW 20

114158

1.030

Screw-On Cone-2 M24/DW 20, galv.

Anchor system M24.
For anchoring climbing systems.

Note

Separate design information on request.

150

SW 36

030860

0.792

Accessories

Threaded Anchor Plate DW 20

Summary of Contents for LPS Screen













































































































































































Search results

Summary of Contents for LPS Screen

Reviews:

Peri LPS Screen, Instructions For Assembly And Use, Page: 162 / 172

Search results

Summary of Contents for LPS Screen

Reviews: