90
29
29.1
29.2
30.1
30
C2 On-Site Assembly
Edge Screen Adapter Telescope LPS
(29)
1. Unscrew two clamping screws (29.1)
a few turns.
2. Insert End Screen Adapter at the cor-
ners, from above or from below, over
the edge frames of the Screen Ele-
ment (21) and Telescopic Screen (22).
3. Hand-tighten clamping screws (29.1)
to the screen.
(Fig. C2.08 + C2.09)
Do not tighten the attachment (29.2) of
the sliding clamping plate. The clamping
plate must remain slideable on the in-
side, in order to ensure a uniform clamp-
ing effect on both edge profiles. If inad-
vertently tightened, loosen the Nut by
half a turn.
Edge Screen Adapter Corner LPS (30)
For edge attachment of Telescopic
Screens at right angles to other Screen
Elements.
1. Unscrew four clamping screws (30.1)
a few turns.
2. Insert End Screen Adapter at the cor-
ners, from above or from below, over
the edge frames of the Screen Ele-
ment and Telescopic Screen.
3. Hand-tighten clamping screws to the
screen.
(Fig. C2.08 + C2.10)
Components
29
Edge Screen Adapter Telescope
LPS
29.1
Clamping Screws
29.2
Bolted Connection for Distance
Plate
30
Edge Screen Adapter Corner LPS
Fig. C2.08
Fig. C2.09
Fig. C2.10
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration