83
21
27.3
27.4
27.6
27
22
27.5
27.2
C1 Pre-Assembly
Mounting the Screen Adapter Combi
LPS 60 (27)
Telescopic distance ≤ 0.87 m.
1. Install Ring Bolt and Distance Piece in
the same way as the Screen Adapter.
2. Position Screen Element (21) on Dis-
tance Piece.
3. Attach long Clamping Plate (27.3) to
the Ring Bolt (27.4) and place it over
both frames (21.1) of the Screen Ele-
ment.
4. Secure long Clamping Plate with Nut
(27.6) M20x8. Tightening torque
80 Nm. (Fig. C1.24)
Pay attention to the mounting direction
of the Clamping Plate, long end must
point outwards.
5. Slide the Telescopic Screen (22) into
position.
6. Insert the bolt from the Mesh Panel
Clamp (27.2) through the Telescopic
Screen as well as the long Clamping
Plate and secure with Washer and Nut
(27.5). Tightening torque 80 Nm.
(Fig. C1.25)
Components
21
Screen Element DX LPS
22
Telescopic Screen DX LPS
27
Screen Adapter Combi LPS 60
27.2
Mesh Panel Clamp
27.3
Long Clamping Plate
27.4
Ring Bolt
27.5
Washer and Nut
27.6
Nut
Fig. C1.24
Fig. C1.25
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration