93
62
62
75
75
75
62
21
21
21
Gap Covering with Cover Strip
Rubbers
1. Cut Cover Strip to required size.
2. Pre-drill (Ø 8 mm) Cover Strip.
3. Mount Cover Strips with cable ties
through the wire mesh of the Screen
Element.
Assembly on the Telescopic Screen
takes place in the same way.
Units straight next to each other
Mount Cover Strip LPS 0.20 (62) with
cable binder (75).
Fig. C2.13a
Fig. C2.13c
Fig. C2.13b
C2 On-Site Assembly
Units on the internal corner
In the area of the Climbing Rail and en-
closure post, mount Cover Strip LPS
0.20 (62) on both sides using cable
binder.
Components
21
Screen Element DX LPS
62
Cover Strip LPS 0.20 x 10 m
75
Cable Binder PA 6.6 SW 203x7.6
Units on external corners
In the area of the Climbing Rail and en-
closure post, mount Cover Strip LPS
0.20 (62) on both sides using cable
binder.
min. 50 mm
max. 80 mm
m
in. 5
0 m
m
m
ax. 8
0 m
m
m
in. 5
0 m
m
m
ax. 8
0 m
m
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration