85
44
44.1
29.1
29
22
21
29.2
43
C1 Pre-Assembly
Fig. C1.28
Fig. C1.29
Fig. C1.29a
Mounting the Edge Screen Adapter
Telescope LPS
Optional, required depending on the
wind load.
1. Unscrew the clamping screws (29.1) a
few turns.
2. Insert End Screen Adapter (29) at the
corners, from above or from below,
over the edge frames of the Screen
Element (21) and Telescopic Screen
(22).
3. Hand-tighten clamping screws to the
screen.
(Fig. C1.28)
Do not tighten the attachment of the
sliding clamping plate (29.2). The clamp-
ing plate must remain slideable on the
inside in order to ensure a uniform
clamping effect on both edge profiles. If
inadvertently tightened, loosen the Nut
by half a turn.
Mounting the Telescopic Scaffold
Tube LPS
For assembling the Telescopic Screen,
pull out approx. 10 cm.
1. For supporting the Foldable Covers in
the area of the Telescopic Screen, in-
sert a Telescopic Scaffold Tube LPS
(44) into the scaffold tube (43).
2. Attach Clip M10 (44.1) to the Tele-
scopic Screen.
(Fig. C1.29 + C1.29a)
Components
21
Screen Element DX LPS
22
Telescopic Screen DX LPS
29
Edge Screen Adapter Telescope
LPS
29.1
Clamping Screws
29.2
Bolted Connection for Distance
Plate
43
Scaffold Tube Ø 48.3 x 3.2
44
Telescopic Scaffold Tube LPS
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration