76
79
41
41.1
40
42
42
43
≤ 2
0
C1 Pre-Assembly
3. Cut untreated plywood to size and
pre-drill with Ø 11 mm.
4. Mount Flap Hinges (41) with the sup-
plied Bolts M10x50-8.8 (41.1) and
Washers. Permissible arrangement:
see Fig. B2.11 and Table B2.04 on
Page 47.
5. Suspend the Foldable Cover (40) on
the scaffold tube (43) and place on tie
rod (97).
6. For each Foldable Cover, mount one
Flap Safety Plate (42) approximately in
the centre using 2 SPAX Screws TX
30 8x20. Foldable Cover is now se-
cured. (Fig. C1.17)
Components
2
Climbing Rail-2 LPS
40
Foldable Cover
41
Flap Hinge LPS Ø 48/M10
41.1
Bolt M10x50-8.8
42
Flap Safety Plate LPS Ø 48
43
Scaffold Tube Ø 48.3 x 3.2
79
Untreated Plywood 20, 21 mm
Fig. C1.17
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration