manualshive.com logo in svg

Peri LPS Screen, Instructions For Assembly And Use, Page: 165 / 172

Share
Download
Peri LPS Screen Instructions For Assembly And Use Download Page 165

LPS Light Climbing System

163

  Item no.  Weight kg

127834

  2.210

Crane Eye BR-2 2.5 t, galv.

As attachment point for moving climbing systems 
or Platform Beam BR.

Note

Follow Instructions for Use!

Technical Data

Permissible load-bearing capacity 2.5 t.

1

3

5

2

4

5

100

Ø60

75

15

020620

  0.561

Accessories

Spacer for Platform Beam BR

125632

  0.050

Protect. Covers Climb. Device RCS

Spare part. To protect the quick couplers against 
dirt and damage.

Technical Data

1 set for 1 Climbing Device RCS 50 (2x bushing 
and 2x nipple each).

Ø27,1

Ø23

110279

  0.250

Plug Socket RCS, black

For providing the power supply to the Hydraulic 
Pump RCS with 380 – 460 V, 50 – 60 Hz.

Note

Follow Instructions for Use!

166

110280

  0.500

Adapter Cable RCS

For the power supply to the Hydraulic Pump RCS.

Note

Follow Instructions for Use! 
With CEE plug connector 400 V 16 A.

 400

Summary of Contents for LPS Screen













































































































































































Reviews:

No comments