Peri LPS Screen, Instructions For Assembly And Use, Page: 54 / 172

54
29
22 30
29
30
21
22 21
22
28
28.1
B2 Planning the Units
Fig. B2.22
Fig. B2.21
Fig. B2.22a
Screen Adapter Corner LPS
For fixing Telescopic Screens LPS at
right angles to other screen elements.
Assembly of the Screen Adapter Corner
takes place with the Screen Anchor
Plate (28.1), nuts and counter nuts on
the double strut of the Telescopic
Screen (22) or on the struts of two adja-
cent standard Screen Elements.
(Fig. B2.21)
Edge Screen Adapter Telescope LPS
With increased wind loads, mount the
Edge Screen Adapter Telescope LPS
(29) across the top and bottom sides of
the Telescopic Screen (22) and Screen
Element (21).
Hand-tighten clamping screws to the
screen.
(Fig. B2.22 + B2.22a)
Edge Screen Adapter Corner LPS
When forming corners, mount the End
Screen Adapter Corner LPS (30) on the
top and bottom sides of the Telescopic
Screen.
Hand-tighten clamping screws to the
screen.
(Fig. B2.22 + B2.22a)
See PERI Design Information Section
3.6 "Telescopic Extension".
Components
21
Screen Element DX LPS
22 Telescopic Screen DX LPS
28 Screen Adapter Corner LPS
28.1 Screen Anchor Plate
29 Edge Screen Adapter Telescope
LPS
30 Edge Screen Adapter Corner LPS
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration