115
2
8
8.2
8.1
8.4
8.5
8.6
D3 Horizontal Bracing
Vertical Bracing
– Mount bracing connections (8) in the
outer row of holes on the Climbing
Rail (2).
– The web plates of the Climbing Rails
must engage the notches (8.6) of the
bracing connections.
– The anchoring points must point to-
wards each other and in the direction
of the Bracing Chains.
– Foldable Covers must be able to be
folded up and secured.
Assembly:
1. Mount the Bracing Chain (8.1) with
Shackle (8.2) to the bracing connec-
tion (8).
2. From above, insert bracing connection
with mounted chain into the first free
hole of the Climbing Rail (2). Secure
bracing connection with linch pin (8.3).
3. Mount additional bracing connection
above the Slab Shoe and secure with
linch pin.
4. Attach Bracing Chain with Turnbuckle
(8.4) to the bracing connection. Se-
cure chain overhang to the Bracing
Chain by means of a snap hook (8.5).
5. Pre-tension Bracing Chain with Turn-
buckle:
– Oiled Turnbuckle: hand-tightened.
– Non-oiled Turnbuckle: hand-tight-
ened plus one complete turn (360°).
Components
2
Climbing Rail-2 LPS
8
Bracing Connector LPS
8.1
Bracing Chain LPS 5.0 m
Fig. D3.01a
Fig. D3.01
Fig. D3.01b
Fig. D3.02
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration