114
10.7
10.7
10.7
10.7
250 mm
8
9 m
m
250 mm
7
7 m
m
200 mm
700 mm
700 mm
1000 mm
1000 mm
9
5 m
m
71
m
m
200 mm
Height Adjustment of the Slab
Shoe
Adjust the height of the Slab Shoes, en-
abling the mesh enclosure to be vertical-
ly aligned.
Slab Shoes are difficult to adjust when
loaded.
⇒
⇒
Ensure Slab Shoes are unloaded be-
fore adjusting the height.
⇒
⇒
Ensure that the climbing unit is sta-
tionary.
1. For lifting the Slab Shoe, turn the Ad-
justing Bolt SW 36 (10.7) in an an-
ti-clockwise direction; for lowering,
turn in a clockwise direction.
2. Use a straight board with a spirit level
in order to align the pair of shoes and
thus the mesh enclosure of a climbing
unit.
Standard pawl measurement above the
slab = 83 mm.
For anchor distance a = 700 mm (stand-
ard position for Version 1), the adjust-
ment range for the pawl position is 71 ...
95 mm = 83 ± 12 mm.
(Fig. D2.04a + D2.04b)
For anchor distance a = 1000 mm
(standard position for Version 2), the ad-
justment range for the pawl position is
77 ... 89 mm = 83 ± 6 mm.
(Fig. D2.04c + D2.04d)
Components
10.7
Adjusting Bolt SW 36
D2 Operating the Slab Shoe
Fig. D2.04a
Fig. D2.04b
Fig. D2.04c
Fig. D2.04d
LPS Screen Lightweight Climbing Enclosure
Instructions for Assembly and Use – Standard Configuration